Skip to main content

FALL INVENTORY SALE / SAVE ON A NEW AIR CONDITIONER, FURNACE, OR COMPLETE HVAC SYSTEM.  Get a FREE Estimate

If your furnace is getting older, you may assume your only choices are to keep repairing it or replace the entire system.
But what if there were another option? Many older furnaces are still capable of providing dependable heat, but years of operation can take a toll. Dust and debris accumulate inside the cabinet. Blower wheels become dirty. Burners develop buildup. Electrical components age. Older blower motors consume more electricity than newer technology, and aging ignitors can eventually leave you without heat.

That’s why Paul’s Heating & Air Conditioning created Paul’s Furnace Restore Package.
Furnace Restore goes far beyond a traditional furnace tune-up. It combines an extensive inspection, deep cleaning, safety testing, component cleaning, and qualifying equipment upgrades into one comprehensive service designed to give an aging furnace the attention it deserves. Before assuming your older furnace needs to be replaced, here’s what you should know.

What Is Paul’s Furnace Restore Package?

Think of Furnace Restore as a comprehensive restoration service for qualifying older furnaces. Routine furnace maintenance is important, but Furnace Restore takes things several steps further. Paul’s technicians get deeper into the equipment to inspect its condition, remove years of accumulated debris, clean components that aren’t normally deep-cleaned during basic maintenance, test important electrical and safety controls, and upgrade certain older components when compatible with the existing furnace. The goal isn’t to pretend an older furnace is brand new.

The goal is to clean it, inspect it, upgrade appropriate components, test its operation, and help you get the most out of the furnace you already own.

Why Do Older Furnaces Need More Than a Basic Tune-Up?

Think about how many hours your furnace and blower have operated over the years. Every heating season puts additional operating hours on motors, burners, electrical components, and other parts. If the blower is also used for central air conditioning, portions of the system may be operating throughout much of the year. Meanwhile, dust, pet hair, dirt, and other debris can gradually accumulate inside the equipment. Eventually, an older furnace may need more than a basic inspection. That’s where Furnace Restore comes in.

1. It Starts With a Complete Furnace Inspection

Before we start restoring anything, we want to understand the condition of the equipment.
Paul’s performs a detailed visual inspection of the furnace cabinet and components, looking for visible signs of deterioration such as rust, motor oil leakage, damaged wiring, excessive buildup, and component fatigue.

We also inspect the furnace circuit board, including a visual examination of resistors, connections, and solder joints for signs of overheating or deterioration.
Catching a developing problem now may give you an opportunity to address it before it becomes a much bigger problem later.

2. We Deep Clean the Furnace Cabinet

Open a furnace that has been operating for years and you may find considerably more dirt inside than you expect. Dust and debris can accumulate around motors, electronics, wiring, and other internal components. During Furnace Restore, Paul’s thoroughly vacuums the furnace cabinet and uses compressed air where appropriate to remove accumulated debris. This isn’t just about making your furnace look cleaner. Keeping internal components free from excessive dirt and debris can help equipment operate as intended and reduce unnecessary stress on certain components.

3. We Remove and Deep Clean the Blower

One of the biggest differences between a basic furnace service and Paul’s Furnace Restore Package is what happens to the blower assembly.
We take it out. The blower is responsible for moving heated and cooled air throughout your home. Over time, its wheel blades can become coated with dirt.
That buildup can affect airflow and blower performance. Instead of simply vacuuming around the blower, Paul’s removes the blower assembly so the wheel and housing can be thoroughly cleaned using professional cleaning methods. Once years of buildup have been removed, the cleaned blower assembly is reinstalled and evaluated as part of our final system testing.

4. We Perform Comprehensive Electrical and Safety Testing

A furnace depends on numerous electrical components and safety controls to operate correctly. During Furnace Restore, Paul’s tests applicable switches, wiring, controls, and safety devices to verify proper operation and look for potential problems. Electrical issues aren’t always visible to a homeowner. A furnace can appear to be working normally while an aging component or connection is beginning to deteriorate. Our goal is to identify those concerns before another heating season puts additional demand on the equipment.

5. We Inspect the Heat Exchanger

The heat exchanger is one of the most important components in a gas furnace—and its condition becomes particularly important as equipment ages.
The heat exchanger separates combustion gases from the air being circulated through your home. Age, corrosion, repeated heating and cooling cycles, and other factors can eventually contribute to heat exchanger deterioration. As part of Furnace Restore, Paul’s uses specialized inspection cameras to examine accessible areas of the heat exchanger for visible signs of cracking, corrosion, or other deterioration. If we find something concerning, we’ll show you what we’ve discovered and discuss the appropriate next steps.

6. We Perform Carbon Monoxide Testing

Our safety evaluation doesn’t end with a camera inspection. Paul’s also performs carbon monoxide testing as an additional safety check.
Carbon monoxide is odorless and colorless, which is why proper furnace operation, professional inspection, and working carbon monoxide alarms in the home are so important. If we identify a potentially unsafe condition, addressing that problem takes priority over continuing with restoration.

7. We Remove and Clean the Furnace Burners

Burners are another area where years of operation can leave behind dirt, rust, and debris.
Excessive burner contamination can interfere with ignition and proper flame characteristics. In more serious situations, combustion problems can contribute to flame rollout, where flames extend beyond the intended burner area. That’s not something you want happening inside your furnace. As part of Furnace Restore, Paul’s removes the burners and thoroughly cleans them using appropriate professional cleaning methods. The burners are then reinstalled and evaluated during our final furnace operation test.

Here’s Where Furnace Restore Gets Really Interesting: The Upgrades

Cleaning an older furnace is valuable. But we wanted Paul’s Furnace Restore Package to do more. For qualifying furnaces, Furnace Restore includes upgrades to two components that can make a meaningful difference in an older system.

Upgrading an Older PSC Blower Motor to ECM Technology

Many older furnaces use a PSC—or permanent split capacitor—blower motor. Modern HVAC equipment increasingly uses more energy-efficient electronically commutated motor technology.

For compatible furnaces, Paul’s can replace the existing PSC blower motor with an upgraded ECM blower motordesigned to operate with the existing furnace controls.

Why does that matter?

ECM technology can use significantly less electricity than older PSC motor technology under appropriate operating conditions. Actual energy savings depend on the equipment, airflow requirements, motor operation, system configuration, and how frequently the blower runs.
That means homeowners with qualifying equipment may be able to gain the benefits of newer blower motor technology without replacing an otherwise serviceable furnace solely to get a newer motor.

Upgrading the Furnace Ignitor

The hot surface ignitor is a relatively small component with a very important job.
If it fails, your furnace may not produce heat.

Older-style hot surface ignitors can become increasingly fragile as they age. Rather than waiting for an aging ignitor to fail during a cold night, Furnace Restore allows us to proactively replace the existing component on qualifying equipment.

Paul’s installs a compatible upgraded silicon nitride ignitor, providing a durable modern ignition solution compared with many older ignitor designs.
Ask Paul’s about the applicable manufacturer warranty for the ignitor installed in your furnace.

Finally, We Put the Furnace to the Test

We’re not finished just because everything has been cleaned and put back together.

Once the restoration work and applicable upgrades are complete, we run the furnace and test it. Our technicians cycle the system and evaluate important operating measurements and functions, which may include:

  • Temperature rise
  • Blower motor amperage
  • Ignition
  • Burner operation
  • Airflow-related performance
  • Safety controls
  • Overall furnace operation

This final testing helps us verify that the furnace is operating properly after the work has been completed.

Furnace Restore vs. a Furnace Tune-Up: What’s the Difference?

A traditional furnace tune-up is an important part of routine HVAC maintenance. It typically focuses on inspecting, testing, and maintaining the system.
Furnace Restore is designed to go considerably further.

The package combines a detailed furnace inspection, deep cabinet cleaning, blower removal and cleaning, electrical testing, heat exchanger camera inspection, carbon monoxide testing, burner removal and cleaning, qualifying ECM blower motor upgrade, qualifying silicon nitride ignitor upgrade, and final performance testing.
In other words, this isn’t just another furnace tune-up.

It’s a comprehensive service designed specifically for homeowners who want to make a meaningful investment in an older furnace.

Is Furnace Restore Better Than Replacing My Furnace?

That depends entirely on the furnace. And that’s an important distinction. There comes a point when investing significant money in old equipment doesn’t make financial sense. If a furnace has serious safety problems, a compromised heat exchanger, major mechanical problems, or multiple failing components, replacement may be the smarter choice. But age alone doesn’t tell the entire story.

If the furnace is fundamentally sound and compatible with the upgrades included in Furnace Restore, investing in the equipment you already own may be worth considering.

That’s one reason Paul’s evaluates the furnace rather than simply assuming every older system should be replaced. Sometimes replacement is the right answer. Sometimes restoration deserves consideration first.

Who Is a Good Candidate for Paul’s Furnace Restore Package?

Furnace Restore may be a good option if your furnace is getting older but still operating, you’ve noticed years of dirt accumulation, your system uses an older PSC blower motor, or you want a much more comprehensive service than routine maintenance.

It can also make sense if you want the heat exchanger professionally inspected, you’re concerned about an aging ignitor, or you simply want to understand the condition of your furnace before deciding whether to invest in replacement.
Not every furnace will qualify.

Paul’s will evaluate your equipment and help determine whether Furnace Restore makes sense based on its condition and compatibility.

Frequently Asked Questions About Paul’s Furnace Restore

Will Furnace Restore make my old furnace like new?

No. An older furnace remains an older furnace, and components that aren’t replaced retain their existing age and operating history.
Furnace Restore is designed to thoroughly clean and evaluate the equipment while upgrading certain compatible components. It isn’t intended to represent an older furnace as new.

Can Furnace Restore extend the life of my furnace?

Keeping equipment clean and properly maintained and addressing worn components can help reduce unnecessary stress on a furnace. However, no HVAC company can accurately guarantee how many additional years an existing furnace will operate.

Remaining service life depends on the furnace’s age, condition, installation, usage, maintenance history, and individual components.

Can Furnace Restore lower my energy bills?

The ECM blower motor upgrade can reduce blower motor electricity consumption compared with many older PSC motors. Your actual energy savings will depend on your equipment, system configuration, blower operating hours, utility rates, and how you use your HVAC system.

Why does the blower need to be removed for cleaning?

Removing the blower gives our technicians much better access to the blower wheel and housing so accumulated dirt can be thoroughly removed from areas that are difficult to properly clean while the assembly remains inside the furnace.

Why is heat exchanger inspection so important?

A compromised heat exchanger can create a serious safety concern. Because deterioration can occur as furnaces age, inspecting accessible areas of the heat exchanger is an important part of evaluating older gas heating equipment.

What happens if Paul’s finds a damaged heat exchanger?

Safety comes first. If our technicians identify evidence of a potentially unsafe condition, we’ll explain what we’ve found and recommend appropriate next steps. A furnace with a serious safety problem may not be a candidate for restoration.

Why replace my blower motor if it hasn’t failed?

For qualifying systems, upgrading an older PSC motor provides an opportunity to move to more energy-efficient ECM technology while proactively replacing an aging component.

We’ll first determine whether the upgrade is compatible and appropriate for your particular furnace.

Why replace an ignitor before it fails?

An ignitor is a wear component, and failure can prevent a furnace from heating. Proactively replacing an aging compatible ignitor can reduce the chance that the old ignitor becomes the component that leaves you without heat.

Can any furnace get the Furnace Restore Package?

No. The furnace needs to be evaluated for condition, safety, and component compatibility. If significant problems are discovered, Paul’s may recommend repair or replacement rather than investing in restoration.

Before You Replace Your Older Furnace, Find Out What You Have

When a furnace reaches a certain age, homeowners often start hearing the same question:

“Isn’t it time to replace it?”
Maybe.
But before making a major investment in new equipment, it can be worth understanding the condition of the furnace you already own.

That’s the idea behind Paul’s Furnace Restore Package.

Instead of simply performing another basic tune-up, Paul’s takes a deeper approach: inspect it, clean it, test it, upgrade appropriate components, and evaluate the finished system.

If the furnace is fundamentally sound, Furnace Restore may give you another option besides immediately replacing it.
And if our inspection shows that restoration isn’t the right investment?

We’ll tell you that too.

Restore What You Have Before You Replace What You Have

Your furnace doesn’t need to look new to deserve professional attention.

If you have an aging furnace and want to know whether it’s a good candidate for restoration, contact Paul’s Heating & Air Conditioning and ask about Paul’s Furnace Restore Package.

We’ll evaluate your equipment, explain your options, and help you make an informed decision about what comes next.
Clean it. Inspect it. Upgrade it. Test it. Restore it.

Ask Paul’s about Furnace Restore today.